carbide造句

The three mirrors are directly mounted on the Silicon Carbide plates using titanium bolts.
三块反射镜使用钛制螺栓直接安装在碳化硅的端板上。

Experiment on Preparing Masonry Cement Using Damp Fly Ash Activated by Calcium Carbide Slag
用电石渣改性湿排粉煤灰生产砌筑水泥试验

Observation of the thermal farigue crack propagation on the surface of steel bonded carbide.
碳化钨钢结硬质合金表面热疲劳裂纹扩展的观察

Boundary element method for stress analysis of tungsten carbide insert interface on cone bit
牙轮钻头镶齿结合面应力分析的边界元法

The acetylene gas generated by calcium carbide can be applied to weld or cut metal materials.
同电石发生乙炔作金属切氰和焊接。

A Study of the Vanadium Carbide Coating formed on Die Steels by Immersion in a Fused Borax Bath
国产模具钢盐浴碳化钒涂覆工艺的研究

Formation mechanism of trapezoid crack in WC steel bonded carbide under action of thermal stress
热应力作用下碳化钨基钢结硬质合金梯形裂纹的形成机理

The nano tribological friction coefficient of boron carbide increases with the normal load rising.
碳化硼材料纳米摩擦因数随载荷得增加而显著增加。

Performance and Wear Resistance of Non Carbide Bainite Cast Steel for Bucket Tooth and Tooth Stand
无碳化物贝氏体铸钢斗齿，齿座材料的性能及耐磨性

For grinding of materials with high hardness ，such as carbide ，glass，agate ，ceramics，ect.
适用于各种高硬材料的磨削。如硬质合金，玻璃，玛瑙，陶瓷等。

Reduction consumption of mercury bichloride in vinyl chloride production with calcium carbide method
降低电石法氯乙烯生产过程中氯化汞消耗

Application of Sampling Inspection with Adjustment by Counting in Quality Control of Cemented Carbide
记数调整型抽样检验在硬质合金质量控制中的应用

The rifts at both installation holes of the silicon carbide rod ends shall be blocked by asbest rope.
硅碳棒两端安装孔处的隙缝应用石棉绳堵塞。

In stack lining, from clay brick, high alumina brick to silicon carbide brick or alumina carbon brick.
炉身内衬由粘土砖、高铝砖到碳化硅砖或铝炭砖。

Besides , calcium carbide can react with nitrogen to generate lime nitrogen for agricultural fertilizer.
电石与氮气作用生成石灰氮可作农业肥料。

This paper studies the effect of the C content on microstructure and properties of nanosize cemented carbide.
该文研究碳含量对纳米硬质合金组织和性能的影响。

Process for the digestion of ammonia in the production of soda by substituting carbide slurry for caustic lime
电石渣浆代替生石灰用于纯碱蒸氨的工艺方案

The analysis and control of the injurious ingredients contained in carbide slags used as calcareous raw materials
电石渣作为石灰质原料的有害成分分析与控制

Retained austenite reduction and carbide precipitations in the martensite are anticipated by the tempering process.
减少残余奥氏体和马氏体碳化物的降水预计的回火工艺。

The results expatiate that boron carbide ceramics can be sintered in low temperature by approaches mentioned above.
结果表明，通过以上几种途径可以实现低温烧结。

The injurious ingredients contained in carbide slags were analyzed, and the appropriate control measures were proposed.
分析了电石渣中的有害成分, 并提出相应的控制措施。

Study of Connection Methodology of Terminal Block between Short Net Copper Pipe and Soft Cable for Calcium Carbide Furnace
电石炉短网铜管与软缆接线板连接方式的研究

PROCESS OF PRODUCTION Boron Carbide is smelted from boric acid and powdered carbon in electric furnace under high temperature.
碳化硼生产过程是由硼酸和冶炼电炉碳粉在高温下。

Mutual solution and diffusion carry on between tungsten carbide phase and matrix phase when the alloy is heated at high temperature.
碳化钨相与基体相在加热到高温时发生相互溶解和扩散。

The result showed that the atomization of molybdenum on the graphite probe surface originates from the thermolysis of his carbide compands.
结果表明钼得原子化源于它得碳化物得热离解。