crank造句

Typically, defense contractors crank out just a few hundred armored vehicles a year.
通常，国防承包商一年才造几百辆装甲车。

The crank handle is designed as detachable to minimise the dimension of the actuator.
手柄与电动执行器是可分开的，以最小化电动执行器体积。

and the crank is connected with the main shaft of the motor through a transmission rod.
曲柄通过传动杆与电机主轴连接。

Remove motor shaft end cover. Apply hand winding crank to the squared end of motor shaft.
拆去电机轴尾盖, 将盘车手轮放在电机轴尾。

As the stewardess starts to crank open the cabin door, the captain comes over the intercom.
当空姐开始曲柄打开舱门，船长过来的对讲机。

The invention relates to a crank shaft of a riser, belonging to the field of automobile parts.
本发明涉及一种升降器摇柄轴，属于汽车零件领域。

The design of crank swing arm mechanism having a demand of approximately intermittent operation
具有近似停歇要求的曲柄摇杆机构设计

Dispose scheme to burn and ablation of the crank pin bearing bushing in the reforming supercharger
重整增压机连杆大头瓦烧研的处理方案

A crank arm is the offset portion of a crankshaft to which connecting rod and position are attached.
曲柄臂是曲轴连接臂，其中安装连杠和活塞。

In an engine the linear motion of the pistons is converted into rotational motion by the crank shaft.
在引擎中, 活塞的直线运动通过曲轴被转化为旋转运动。

the fixed phase relation between the main crank and the assistant crank are maintained in each cycle.
使主副曲柄在每个周期保持固定的相位关系。

It adopts the rigid clutch with double rotors which are installed on the right side of the crank shaft.
该系列生产线采用双转键刚性离合，装于曲轴的右端。

The upper is communicated with the gas chamber and the lower is linked with the rocker through the crank.
上端与气室相连，下端通过曲柄与摇杆相连。

Measuring crank deflections for per cylinder, in accordance with diesel works requirements and criterions.
主机各缸臂距差均在主机厂要求的范围内，符合规范的要求。

Problems and analyses on Design of inner cam controlling mechanism of planting crank for rice transplanter
关于转臂滑道式栽插机构设计的若干问题与分析

Study of the Definition of the Crank Angle Between the Two Limiting Positions of Planar Linkage Machanisms
平面连杆机构极位夹角定义的探讨

The Optimization Design of the Planetary Gear Reducer of Small Tooth Differece with the Biasing Crank Shaft
偏曲轴少齿差行星减速器优化设计

the lower end of the crank arm type bearing seat is hinged with the lower end of the hydraulic oil lift plunger.
拐臂式轴承座下端与液压油顶活塞下端铰接。

According to the spool thread shape difference， the axis may divide into the crank and the straight axle two kinds.
根据轴线形状的不同，轴可以分为曲轴和直轴两类。

If youre not rushing, then you'll use the colonial age to crank on your economy, trying to quickly get to the next age.
殖民地时期，人们大多数以土地为生。

A mechanical model for calculating the strength of the crank pin on pumping units is established by a rotary coordinate.
采用动坐标系建立了曲柄销强度计算的力学模型。

Because an eccentric can be attached anywhere along a shaft, it is unnecessary to form any part of the shaft into a crank.
由于偏心轮可装于轴的任何部位, 不必把主轴作成曲柄。

the utility model is suitable for the processing accessory on the numerical control crank special lathe and the large overhanging cutter.
适于数控曲拐专用车床及大悬伸刀具对零件加工。

As a result, it can decrease production routine and reduce production casts, which will lay foundations for practical research on parts such as crank axle.
本研究为曲轴等非调质钢零件的实用性研究提供参考。

Characteristics of Motional Law of Large Eccentric Double Crank Connecting Rod Mechanism Adopted in Single Cylinder Diesel Engine and Its Influences on Working Process of Diesel Engines
大偏心双曲柄单缸柴油机运动规律及工作过程的研究