shear造句

Influence of Different Adhesive Systems on Shear Bond Strength of Ceramic Bracket to Porcelain Surface
陶瓷托槽与瓷面粘接实验研究

Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
用拉力负荷法测定受剪切力的胶粘接合强度的试验方法

When a prestressed mud dyke is adopted, it could be analyzed with the shear stiffness allotting method.
当采用加固土预留土堤时, 可采用抗侧刚度分配法分析。

Analyses of the shear lag effect on the top and bottom plates of box beams with varying loading locations
荷载横向变位下箱梁顶板与底板的剪滞效应分析

Based on the calculated pressure and velocity profile, the shear rate and shear viscosity were simulated.
在此基础上, 对剪切速率及剪切粘度进行了模拟计算。

MICROCRYSTALLINE AND AMORPHOUS PHASE INDUCED BY HIGH PRESSURE AND SHEAR DEFORMATION IN GaAs SINGLE CRYSTAL
砷化镓单晶中微晶和非晶的形成机制

Amplitude and anisotropy of apparent resistivity change in big models during shear and frictional slipping
剪切和摩擦滑动大模型的视电阻率变化幅度和各向异性

The drilling fluid has high apparent viscosity, high shear strength and strong shear dilution performance.
该钻井液表观粘度高，切应力较大，剪切稀释特性强。

The cutter is made of imported alloy, tough and durable, and with powerful shear force for the powercutter.
刀片采用进口合金制造，坚固耐用，动刀剪切力大。

SC fabrics and asymmetric rotational augens in mylonite indicate sinistral shear and locally dextral shear.
组构和不对称旋转碎斑指示以左旋剪切为主。

The Comparative Study on the Simple Shear Test and Direct Shear Test of Interface between Soil and Structure
土与结构界面模型单剪与直剪试验对比研究

The effect of this mass addition to the boundary layer is to reduce the aerodynamic heating and shear forces.
质量引射到附面层的效应降低了气动热交换和剪切力。

Wants to say the words said do not export, shear love sickness actually does not shear the sorrow of parting.
想说的话已说不出口，剪断相思却剪不断离愁。

A New Type of Locking Device of Mechanism with Alternating Motion THE ESSENCE AND ELIMINATION OF SHEAR LOCKING
新型往复运动机构的锁闭装置剪切锁闭的本质及解除方法

The characteristics of shear rate in an airlift nitrifying bioreactor and its influencing factors were studied.
研究了气升式硝化反应器的剪切特性及其影响因素。

Aeroelastic Stability for Helicopter Rotor Blades with Consideration of Transverse Shear Deformation and Warping
考虑剪切和翘曲影响的直升机旋翼气弹稳定性分析

The slope at any section of the actual beam is equal to the shear at corresponding section of the conjugate beam.
实际梁任何部位的角变等于共轭梁相对应部位的剪力。

Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
检测粘土排水残余剪切力的扭环剪切力试验的试验方法

Textures distribution along the thickness af te r cross shear rolling of high purity aluminum foils was investigated.
通过异步轧制，研究了高纯铝箔冷轧织构沿板厚的分布规律。

Microstructure near the Penetrated Hole in an Experimental Penetration Target and Characteristics of the Adiabatic Shear Band
穿甲试验靶弹孔微观结构和绝热剪切带特性

In this paper, the shear lag effect in box girder bridges is analysed by means of variational calculus and finite strip method.
本文应用变分法和有限条法分析箱形梁桥的剪滞效应。

The shear force reading of a ball bond must be correlated with its ball diameter for proper assessment of its ball shear strength.
剪切力度应与金球直径相关。

Lateral shear distribution along anchorage length in anchoring cables considering slippage and softening affect of groutrock interface
考虑孔壁界面滑移软化的预应力锚索锚固段侧阻力分布

CALCULATION OF STRESS INTENSITY FACTOR FOR A BONDED REPAIR STIFFENED PANEL AND SHEAR STRESS IN THE ADHESIVE BOND BETWEEN PATCH AND PLATE
胶补加筋板应力强度因子及胶层剪应力计算

The cocurrent shear plays the roles on thinning film thickness and enhancing heat transfer, and the countercurrent shear has inverse effect.
同向切应力具有减薄液膜厚度和增大传热系数的作用。