gear box造句

The third from the lowest forward ratio in the gear box of a motor vehicle.
机动车辆的传动箱中倒数第三个最低比率的前进装置。

The rate of the machine moved up sharply because of changing a big gear box.
由于换了一个大齿轮箱这台机器得速度大大提高了。

This paper solves the size problems of gear box in assembly precision design.
装配精度设计常会遇到齿轮箱各有关尺寸问题。

Gear box has a separate lubrication, with the pump working chamber separated.
齿轮箱中有独立的润滑，与泵工作腔隔开。

General Machine concentrated in the main gear box and gearbox in the spindle.
一般机床的齿轮主要集中在主轴箱和变速箱中。

The mechanical driving part is made up of the import motor and matched gear box.
机械传动部分采用进口马达与配套得减速箱构成。

The bottom of the gear box is communicated with the painting box via a paining pipe.
所述装配箱底部通过回油管与涂料箱连通。

After gear box is reinstalled, just tighten up the screws and washers with even force.
重新安装齿轮箱将跟螺丝及华司用力平均锁紧即可。

Involves to gear box's transmission ratio and differential device's transmission ratio.
就牵扯到变速箱的速比和差速器的速比。

Performance Test and Analysis of a Helicopter Refrigeration Fan of Lube in Main Gear Box.
某型直升机主减滑油冷却风扇性能测试及分析

A cog, a lower gear and a medium gear inside a medium wheel box are fixed mesh connection.
介轮箱内的上齿轮下齿轮和介轮是固定啮合连接。

This is mainly the sound which the automatic gear box's fluid strength bending moment sends.
这主要是自动变速箱得液力变矩器发出来得声音。

Transmission system adopts famous brand motor and hydraulic mechanical transmission gear box.
动力传动系统采用名牌发动机和液力机械传动箱。

Experience on repairing hole surface of the bearing seat for the rolling mill gear box on site
轧机主减速机轴承座孔的现场表面修复实践

Design and research on the main distribution gear box for tension and bending leveling machine
拉弯矫直机主分配箱设计与研究

Mathematical model of power loss in reducing gear box on ship under arbitrary steady operating condition
舰船并车减速齿轮箱任意稳态工况下功率损失的数学模型

Analysis of Fatigue Failure of Gear Pair in Spindle Transmission Box of Milling Machine and Countermeasure Process
铣床主传动箱齿轮副断齿的分析及对策

Failure Analysis and Technical Improvement of the Bevel Gear in Tension Levelers Transmission Reduce Box on Pickling Lines.
酸洗拉矫机减速机弧形锥齿轮失效分析及改进技术

Two measures, one is the method of counteracting strain, another is the method of fixing two sets of2322 bearings in bearing box on the end of gear, are taken in order to improve the stress status of gear in blower on high load.
采取两种措施改善高负荷下风机齿轮得受力情况。