titanium造句

The paper dissertated the impurity distribution of titanium sponge and its affect on product quality.
本文论述了海绵钛产品的杂质分布及对产品质量的影响。

Determination of Titanium in Triuranium Octaoxide by Square Wave Static Mercury Adsorption Voltammetry
方波悬汞吸附伏安法测定八氧化三铀中的钛

Tarnish induced by Porphyromonas gingivalis 381 on implant denture surface of titanium and Ti73 alloy.
牙龈卟啉菌381对纯钛及钛75合金种植体表面失泽的腐蚀

The effects of laser transformation hardening on the fretting wear of titanium alloy are investigated.
研究了 激光淬火 对钛合金微动磨损性能的影响。

Clinic Analyses of Titanium Plate Becoming Broken and Loosed Postoperation of Mandible Reconstruction.
下颌骨节段性缺损重建后钛板断裂、松脱的临床分析

Measurement of Titanium Dioxide in Titanium Concentrate by Ammonium Ferric Sulfate Volumetric Analysis
用硫酸铁铵容量法测定钛精矿中二氧化钛含量

To investigate the effect of titanium nitride coating on corrosion resistance of dental casting alloys.
研究氮化钛涂层对牙科铸造合金腐蚀性能的影响。

Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
用惰性气体熔解技术测定钛及钛合金中氧含量的试验方法

A study on interracial bonding strength between porcelain and cast titanium, porcelain andwrought titanium
铸造纯钛和锻造纯钛与瓷的结合性能比较

Preparation of Titanium Pillared Montmorillonite by Hydrothermal Method and Adsorption of Arsenate in Water
水热法制备钛柱撑蒙脱石及对水体中砷酸根的吸附

Preparation of Expanded Graphite Loaded Titanium Oxide with Titanium Tetrachloride as Intercalation Reagent
以四氯化钛为插层剂制备插钛膨胀石墨的实验研究

The base phase in the alloys is titanium vanadium based solid solution, which has the bcc lattice structure.
合金主相为钛钒基固溶体，具有体心立方结构。

The Research of Degrading Amine Benzene Waste Water Through New Type of Titanium Based Lead Dioxide Electrode
新型钛基二氧化铅电极降解苯胺的试验研究

Effect of some technical factors on melting process and absorption rate of titanium additive in liquid aluminum
工艺条件对铝液中钛添加剂熔解速度和吸收率的影响

Electrochemical measurement is employed to study the corrosion resistance of the titanium alloy after anodizing.
采用电化学方法研究了阳极氧化后钛合金的耐腐蚀性能。

Determination of the whole quantity of low valence titanium in the high titanium oxide bearing blast furance slag
高钛炉渣中低价钛合量的测定

Tendency and research status on brazing and diffusion bonding for titanium as well as its alloy to stainless steel
钛合金与不锈钢的钎焊和扩散焊技术研究现状及发展趋势

The damage and corrosion of titanium regulating valve is described and the fracture cause of valve core is analyzed.
介绍了钛调节阀的损坏和腐蚀情况，分析了阀芯的断裂原因。

The paper introduces the possibility of application of the titanium and titanium alloy wrought products of motorcar.
介绍了汽车中使用钛及钛合金各类加工材的可能性。

It was concluded that hardness and electric conductivity could be the parameters for burn detection of titanium alloy.
得出硬度和电导率可作为钛合金烧伤的检测参数的结论。

Treatment of refractory inner canthus deformity using autologous fascia combined with titanium plate and titanium nail
自体阔筋膜移植联合钛板钛钉内固定矫正难治性内眦畸形

The hiding power and the oil absorption values of composite filler were approximately equal to those of titanium dioxide.
复合填料的遮盖力和吸油值基本接近钛白粉。

For enclosures of light alloys， the percentage content of aluminium， titanium and magnesium will normally be required.
轻质合金外壳中铝，钛，镁含量

Improvement of Test Method for Sulfuric Acid Fume in Tail Gas of Acid Hydrolysis during Production of Sulfate Process Titanium Dioxide
硫酸法钛白酸解尾气硫酸雾检测方法的改进

With the development of new technology in aviation, it seems an inexorable trend that titanium alloy forgings will become larger and larger.
随着航空新技术的发展，钛合金锻件大型化是必然趋势。